Supply domain

Law Enforcement & Field Equipment

This collection brings together the less-lethal and protective equipment Sentinel supplies to police, gendarmerie and internal security services. It covers CS irritant hand grenades and canisters for crowd control, stun and flash-bang distraction grenades for entry teams, signalling smoke grenades, radio-frequency jammers that protect vehicles and convoys against radio-controlled IEDs, and the anti-riot suits, overalls, holsters and camouflage that equip personnel in the field. Each product page carries the full specification table.

Line items: 27
Calibres: 1
Natures: 2

By calibre

82 mm 5

CS Tear Gas Hand Grenades and Irritant Canisters

Explore this type

CS irritant grenades are the core less-lethal tool for dispersing crowds in the open or clearing enclosed spaces. This range covers burning-type hand grenades in several sizes, from the 80 g RB-M2 and the three-section RBT-CS to the 240 g RB-M1 and the 105 g BRS M79 AG-1, together with the RB-FK and BRS M79 AF-1S burst grenades that release formulated CS powder. The LRB-MR3 can be thrown or launched from a 38 mm weapon with an adapter, while the 82 mm KD-M90 can and the KODS M3, M4 and KODPS ground cans cover wide-area contamination, the KODS cans also serving chemical-condition training.

KD-M90

82 mmSmoke

82 mm CS irritant can KD-M90

CS-filled irritant can launched from an 82 mm vehicle launcher for crowd control over a 75-100 m area.

Mass: 1140 g
Diameter: 82 mm
Height: 152 mm

BRS M79 AF-1S

Smoke

BRS M79 AF-1S CS burst hand grenade

Spherical rubber-bodied grenade that bursts to release a cloud of powdered formulated CS without thermal generation.

Diameter: 75 mm
Height: 108 mm
Active loading: CS-1, formulated powder

BRS M79 AG-1

Smoke

BRS M79 AG-1 CS hand grenade

A chemical hand grenade with a 105 g CS filling that burns for about 80 seconds, used by military and police units in riot control to temporarily incapacitate an unprotected crowd in open or enclosed areas.

Diameter: 56 mm
Height: 147 mm
Mass of the grenade: 455 g

LRB-MR3

Smoke

CS launchable and hand grenade LRB-MR3

CS irritant grenade for hand activation or launch from a 38 mm weapon with a special adapter, with an effective range of 110 ± 30 m.

Effective range: 110 ± 30 m with 38 mm ejecting cartridge
Diameter: 60 mm
Height: 160 mm

KODS M3 / KODS M4 / KODPS

Smoke

KODS CS smoke cans

Ground-emplaced CS smoke cans in three sizes for chemical-condition training and wide-area irritant contamination.

Diameter: 80 / 180 / 184 mm (M3 / M4 / KODPS)
Height: 130 / 240 / 235 mm
Weight of can: 0.7 / 5.2 / 3.75 kg

RB-BD / RAPID SMOKE

Smoke

RB-BD rapid smoke CS hand grenade

A rapid-emission CS hand grenade carrying 120 g of pyrotechnic irritant mixture to contaminate an area and temporarily disable a crowd through severe eye and respiratory irritation without injury.

Diameter: 60 mm
Height: 150 ± 2 mm
Mass of the grenade: 280 ± 10 g

RB-FK

Smoke

RB-FK CS powder burst hand grenade

A compact burst hand grenade whose body opens after a delay to release 60 g of formulated CS powder, contaminating an area and temporarily disabling a crowd without injury.

Diameter: 53 mm
Height: 110 ± 2 mm
Mass of the grenade: 130 ± 5 g

RB-M1

Smoke

RB-M1 CS smoke hand grenade

A burning-type CS hand grenade holding 240 g of pyrotechnic mixture to contaminate an area and temporarily disable a crowd without injury.

Diameter: 57 mm
Height: 150 ± 2 mm
Mass of the grenade: 410 ± 2 g

RB-M2

Smoke

RB-M2 CS smoke hand grenade

Compact aluminium-bodied thermal-generating CS hand grenade for temporary incapacitation of crowds indoors and outdoors.

Diameter: 36.7 mm
Height: 127 +/- 2 mm
Mass of the grenade: 210 +/- 8 g

RBT-CS

Smoke

RBT-CS three-part CS hand grenade

A three-section CS hand grenade for crowd-control operations that contaminates an area in the open or indoors, emitting irritant smoke for about 20 seconds to temporarily disable an unprotected crowd without injury.

Diameter: 38 mm
Height: 125 ± 2 mm
Mass of the grenade: 195 ± 5 g

Stun Grenades and Flash-Bang Distraction Grenades

Explore this type

Stun and flash-bang grenades give entry and arrest teams a few seconds of disorientation. The RSB-P, RSB-4P, RSB-7P and RSB-4PZ family produces one, four or seven reports at one-second intervals, with the 4PZ adding a falling-projectile whistle. The RSFB pairs a single report with an intense flash, the RSB-D3 delivers three successive blast and flash effects at 140 dB, and the spherical rubber RSB-M5 rolls rather than bouncing back to the thrower, while its M5GK variant also disperses 60 g of rubber balls over a 10 m diameter.

RSB-P / RSB-4P / RSB-7P / RSB-4PZ

Other

RSB shock hand grenade series

Hand-thrown shock grenade family giving one, four or seven successive reports; the 4PZ variant adds a falling-projectile whistle.

Diameter: 36.7 mm
Height: 127 +/- 2 mm
Mass of the grenade: 120 / 128 / 135 / 128.5 +/- 5 g (P / 4P / 7P / 4PZ)

RSB-D3

Other

RSB-D3 stun hand grenade

Hand-thrown distraction grenade with three separate pyrotechnic loadings producing three successive blast and flash effects.

Diameter: 45 mm
Height: 186 +/- 2 mm
Mass of the grenade: 530 +/- 5 g

RSB-M5 / RSB-M5GK

Other

RSB-M5 spherical stun hand grenade

Spherical rubber-bodied stun grenade; the M5GK variant additionally disperses rubber balls over a 10 m diameter.

Diameter: 75 mm
Height: 108 mm
Mass of the grenade: 120 +/- 10 g (RSB-M5); 182 +/- 4 g (RSB-M5GK)

RSFB

Other

RSFB shock flash hand grenade

Hand-thrown grenade producing a single strong report with intense light from a fragment-free carton loading.

Diameter: 36.7 mm
Height: 127 +/- 2 mm
Mass of the grenade: 120 +/- 5 g

Signalling and Screening Smoke Hand Grenades

Two hand grenades cover signalling and screening rather than crowd control. The BRD M83 is a steel-bodied grenade offered with yellow, green, blue, orange or red coloured fills of 240 g and a white hexachlorethane fill of 460 g, emitting for 30 to 40 seconds in colour and 50 to 90 seconds in white. The HSG-3S is a three-section grenade with three 70 g loadings used for day and night signalling, marking aircraft landing and parachute drop zones, showing wind direction and camouflaging individuals or groups, with a 3-second delay and about 40 seconds of emission.

BRD M83

Smoke

BRD M83 smoke hand grenade

Steel-bodied signalling and screening smoke hand grenade available in coloured and white hexachlorethane fills.

Diameter: 60 mm
Height: 150 +/- 2 mm
Mass of the grenade: 600 +/- 20 g (white); 380 +/- 20 g (colour)

HSG-3S

Smoke

HSG-3S three-section signalling smoke hand grenade

A three-section smoke hand grenade used for day and night signalling, for marking aircraft landing and parachute drop zones, for showing wind direction and for camouflaging individuals or groups, emitting smoke for about 40 seconds after a 3-second delay.

Diameter: 60 mm
Height: 174 ± 2 mm
Mass of the grenade: 450 ± 10 g

RCIED Jammers and Vehicle Protection RF Jammers

Explore this type

Radio-frequency jammers deny the trigger signal to radio-controlled improvised explosive devices and stop unauthorised cellular use around a protected vehicle. Two rack-mounted systems cover the wideband role: the SPJ-1 spans 20 MHz to 6 GHz in eight bands with up to 310 W and a range of about 100 m, and the modular WRJ 2004 reaches about 200 m with up to 1100 W across up to 12 subbands. The compact VPJ-1, VPJ-2 and VPJ-3 units mount in a vehicle and jam three bands independently within 5 to 10 m, covering 800 to 2500 MHz, 100 to 800 MHz or 100 to 2500 MHz respectively.

SPJ-1

SPJ-1 wideband self-protection radio jammer against RCIEDs

A 6U rack-mounted wideband self-protection jammer against radio-controlled improvised explosive devices, covering 20 MHz to 6 GHz in eight bands with up to 310 W total output and fed by two external multiport omnidirectional antennas.

Weight: 45 kg
Jamming range: up to ~100 m (depends on terrain configuration)
Frequency range: 20 MHz – 6 GHz, separated in 8 bands

VPJ-1

VPJ-1 vehicle protection jammer

A vehicle-mounted jamming unit for protection against radio-controlled improvised explosive devices and unauthorised use of cellular communication devices, blocking up to three frequency bands simultaneously and independently within 5 to 10 metres of the vehicle.

Frequency ranges: BH1 800-1500 MHz, BH2 1500-2170 MHz, BH3 2170-2500 MHz
Synthesizer type: digital
Jamming signal type: fast CW sweep signal, chirp (sweep time as low as 20 µsec)

VPJ-2

VPJ-2 vehicle protection jammer

A vehicle-mounted jamming unit for protection against radio-controlled improvised explosive devices and unauthorised use of cellular communication devices, blocking up to three frequency bands between 100 and 800 MHz simultaneously and independently within a 5-10 metre radius of the vehicle.

Frequency ranges: BL1 100 - 200 MHz; BL2 200 - 400 MHz; BL3 400 - 800 MHz
Synthesizer type: digital
Jamming signal type: fast CW sweep signal, chirp (sweep time as low as 20 usec)

VPJ-3

VPJ-3 vehicle protection jammer

A vehicle-mounted jamming unit for protection against radio-controlled improvised explosive devices and unauthorised use of cellular communication devices, covering three bands from 100 MHz to 2500 MHz with three omnidirectional antennas and jamming within a 5-10 metre radius of the vehicle.

Frequency ranges: BL1 100 - 800 MHz; BL2 800 - 2000 MHz; BL3 2000 - 2500 MHz
Synthesizer type: digital
Jamming signal type: fast CW sweep signal, chirp (sweep time as low as 20 μsec)

WRJ 2004

WRJ 2004 wideband radio jammer against RCIEDs

A rack-mounted modular wideband radio jammer against radio-controlled improvised explosive devices, covering up to 12 subbands with separate exciter-amplifier modules and used for convoy and VIP protection, anti-terror units, bomb squads and military bases.

Jamming range: up to ~200 m
Frequency range: 20 MHz to 3.6 GHz, separated in multiple subranges
Jamming signal type: wideband noise, FM sweep, multicarrier

Anti-Riot Suits, Protective Gear and Field Clothing

Explore this type

This group covers the personal equipment that protects and clothes officers and specialist personnel in the field. For public-order duty there is a full anti-riot suit that combines 30 mesh polyethylene foam with ABS hard parts over torso, shoulders and groin plus reinforced arm and leg sections, together with separate anatomically shaped arm and leg protectors with built-in shock absorbers. For aircrew and airborne units there are flame-resistant pilot flight overalls and a windproof, waterproof parachute overall rated from -50 to +30 degrees Celsius, and for armed and marksman roles there are leather or synthetic pistol holsters and belts and a full-body sniper camouflage ghillie suit.

—

Anti-riot arm and leg protectors

Anatomically shaped arm and leg protectors made from spacer material with an external plastic layer and built-in inner shock absorbers, allowing undisturbed movement.

Construction: spacer material with an external plastic layer
Protected areas: arms and legs
Form: anatomically shaped for undisturbed movement

—

Anti-riot suit

Anti-riot body protection for special police forces and anti-riot squads, combining soft anti-trauma materials such as 30 mesh polyethylene foam with hard plastic parts to shield the body from blows with blunt objects, stings and harmful organic and inorganic chemicals, though not from daggers or crossbows.

Intended users: special police forces and anti-riot squads
Protection scope: blows with blunt objects, stings and harmful organic and inorganic chemicals
Protection limitation: does not protect against daggers or crossbows

—

Parachute overall

An overall for use in extreme weather with rapid temperature changes, made of windproof, waterproof and highly breathable thermo-regulating materials and comfortable across a range from -50 C to +30 C, in sizes M to XXL.

Intended use: extreme weather conditions with rapid temperature changes
Material properties: windproof, waterproof, thermo-regulating and highly breathable
Comfort temperature range: -50 °C to +30 °C

—

Pilot flight overall

A flight overall in flame-resistant aramid or cotton-synthetic fabric with a two-slider zip, reinforced shoulders, sidelong zipped chest pockets, a zipped opening for the anti-G suit hose, Velcro waist adjustment, a front backing for a navigation map, a metal ring for the survival kit and a thigh knife pocket, in sizes M to XXL.

Materials: DuPont Nomex or a cotton and synthetic fabric blend
Fastening: two-slider zipper
Standards: EN 340; EN 11612:2008 (code A1+A2, code B1, code C1)

—

Pistol holsters and belts

Holsters and belts of high-quality leather or synthetic materials made for all types and calibres of pistols and revolvers, with belts that allow numerous combinations of different holsters.

Materials: high-quality leather or synthetic materials
Weapon compatibility: all types and calibres of pistols and revolvers
Design priorities: high durability and comfort

—

Sniper camouflage ghillie suit

A full-body camouflage set of poncho, sleeves and gloves, stockings, helmet cover, hood and scarf plus weapon camouflage stripes, built on a synthetic mesh dressed with impregnated cloth trimmings so the wearer blends into the natural background while retaining high mobility.

Set components: poncho, sleeves and gloves, stockings, helmet cover, hood, scarf and camouflage strips for personal armament
Base material: synthetic mesh with trimmings of impregnated cloth or synthetic mesh
Observation protection: visible and near-infrared spectrum against naked-eye, optical and optoelectronic observation at close range, including below 10 m

Request a quotation Filter the full catalogue